Dani 32.5 - 32.5MM

The Dicodes electronics are the most advanced electronics available in temperature controlled mods.

Made in Germany

*** IN-STOCK FOR IMMEDIATE PROCESSING ***

$410.00
Availability: In stock
SKU
DCM00032
DICODES Dani 32.5   

High Tech German Engineering at its finest.

The NEW Dani 32.5 is a powerful 80 watt, 32.5MM temperature controlled regulated mod, with clean lines and elegant looks, it delivers a high quality, smooth, flavorful vape experience. 

Powered by a single  20700 or 21700  battery, the latest in battery technology.  It features new electronics that includes updated firmware for wire type for SS316L and a wider range of wire coefficients ranging from 50-650.  It features a new battery cap with a multi-contact copper-beryllium spring that provides 8 contacts to the battery and 16 contacts to the tube for maximum power.  It features a spring loaded 510 connection so your atomizer will sit flush when mounted.  And a removable top cap that can be replaced with optional reduction cone in size 30mm to mate perfectly with your Atomizer. 

The Dani 32.5 offers 5 different modes, allowing the user to switch between variable watt, variable watt with heat protection, variable watt with power boost, variable temperature (various wire types supported), and a bypass mode which turns the device into an unregulated protected mod.

This single button device has a new unique simple to use menu structure. *Please take time to read and understand the short manual included with the device, we also recommend downloading the "full detailed" manual for complete instructions and features explanation. (See the pdf attachment below for the full manual.)

The Dani 32.5 is precision engineered in Germany for performance and safety, backed by a two-year warranty on the electronics*.

“DICODES.  There is no substitute, why settle for anything less!”  

 

Features

  • Stainless steel body with custom tactile button and laser engraved logo
  • 80 Watts of power / Variable 5-80W with one Li-Ion battery
  • Mechanical MOD mode (electronically overload protected)
  • 10 Power boost modes
  • 10 Heater protection modes
  • Atomizer resistance range 0.05 to 5 Ohms, total range
  • Atomizer resistance range for 80W: 0.18-1.5 Ohms
  • 32.5mm diameter
  • Adjustable spring loaded high force 510-thread center pin made of CuBe
  • Ultra-low resistance CuBe-Spring for contacting the battery
  • OLED display with high brightness adjustable settings
  • Scrolling single button menu
  • Powered by 21700 or 20700 batteries
  • Up to 12V output voltage 
  • Up to 22A output current
  • Temperature control mode
  • Power boost mode
  • Heat protection mode
  • Bypass mode (protected but unregulated)
  • Reverse battery protection
  • Short circuit protection
  • Adjustable battery discharge level 2.5-3V
  • Versatile easy to use menu structure
  • Individual user preferences selection
  • Reduction-Cone to 30mm (available separately)
  • Temperature controlled vaping mode with various wire-types, (Dicodes NiFe30, Titanium, Ni200, Tungsten, or customize your own)
  • 2 year warranty
  • Made in Germany
  • Dicodes Part-No: Dani 32.5   

 

Contents

  • Dicodes Dani 32.5 mod
  • Short user guide
  • Sample pack of Dicodes NiFe wire
  • Carrying pouch with logo

  

Dimensions / Weight (approx)

Diameter: 32.5mm
Length:  115mm  / 312g

 

Recommended Batteries (NOT included)

SAMSUNG INR 21700 -30T 35A 3000mAh  (21mm diameter x 70mm length)

Sanyo NCR20700A  30A 3100mAh Flat Top Battery

EFest 20700A  30A 3000mAh Flat Top Battery

iJoy 20700A  30A 3000mAh Flat Top Battery

 

Detailed Instruction Manual

Dani_32-5_manual.pdf (2.0 MiB)

 

*Warranty Terms

All Dicodes Mods include a 2 year warranty covering faults within the electronic components of the device. Opening the device, other than the battery cap/cover to change the battery will void the warranty.  * Damage or corrosion to the electronic components of the device, caused by seepage of excessive e-liquid is not covered by the warranty.*

Dicodes Mods  (purchased directly from DICODES USA, within the 2 year warranty period)  will be assigned an RMA numbered form, and a pre-paid shipping label will be provided for the transportation of the warranty return/repair. 

Please Note:  In order for the temperature control settings to function, a coil made from NiFe30, Titanium, Ni200, Tungsten, adjustable („other“) wire must be used, no exceptions. Coils made with Standard Nichrome or Kanthal A1 wire will only support wattage mode, so the temperature control feature cannot be utilized.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!