The Tripod - DLC Carbon Black - RTA by Atmizoo is one the best RTA's on the market and is a step ahead of most other brands. Its 22mm design is perfect for single coil setups. and offers an unparalleled vaping experience focusing on performance, versatility, and ergonomics. With its enhanced flavor and vapor production, the potential for variable specs, instant real-time access to the deck, instant top refill system, easy rebuilding, and attention to detail, it might just be the perfect atomizer.
Made in Greece
The Tripod - DLC Carbon Black RTA by Atmizoo is one the best RTA's on the market and is a step ahead of most other brands. It's 22mm design is perfect for single coil setups and offers an unparalleled vaping experience focusing on performance, versatility, and ergonomics. With its enhanced flavor and vapor production, the potential for variable specs, instant real-time access to the deck, instant top refill system, easy rebuilding, and attention to detail, it might just be the perfect atomizer.
DLC - Stands for diamond-like-coating. It's a nanocomposite that has unique properties of natural diamond low friction, high hardness, high corrosion resistance and much more durable than a traditional painted surface. The finish is a nice carbon black, the finish looks matt.
The Deck - of the Tripod is targeted for single-coil setups with design details aiming to facilitate and improve the rebuilding process as much as possible. Focusing on some of them, you can see high precision large pan head phillips post screws, conveniently placed rails to capture wire either between rail and screw head/body or around screw body (depending on wire D), cut-outs on outer deck rim for easier rebuilding, cut-outs on inner deck rim plus cotton wells to help proper cotton placement and juice distribution along cotton body, sufficient liquid intake slots on deck sides ( approx. 4.0mm x 2.0mm). The Tripod deck can literally host any size of single coil build, from classic small sized ones up to larger exotic coils.
The Air Flow - can be tuned via four-pin options, each one with air hole D=1.0mm/1.2mm/ 1.5mm/1.8mm pinned inside a D=4.0mm nest. You may also regulate more “air” flow via the AFC Ring, adjusting from zero to D=4.0mm.
With the Tripod, we introduce the Chamber and Chimney Reducer assembly. It consists of two parts, that are sandwiching the upper part of the Chimney. When assembled, the C&C Reducer forms a vaporization chamber with lower volume (approx. 5.3mm chamber height) and a chimney with 3.0mm inner diameter, focusing on flavor oriented setups rather than vapor production. When removed, the chamber offers approx. 9.0mm coiling height and the chimney gets approx. 5.3mm inner diameter, with proper geometry to get all the clouds you want. The C&C Reducer actually offers you the potential of two different chamber and chimney geometries, thus two different single-coil RTAs.
The Drip Tip:
Another interesting point is the custom drip tip that comes with the device. This is a two-parts assembly as well, with its two parts sandwiching the Top Cap to ensure extra stability when removing the top cap to refill. The drip tip is easily removable to let you use your own 510 drip tip.
Add to the above an upcoming extended capacity kit (3.5ml from stock 2.0ml – only available outside the EU) and you will have a good idea of Tripod’s potential for versatility.
We have based on the concept of a thread-less mechanism with a twist and pull/push actions in order to design and manufacture high precision parts that make vaping with an RTA so much easier. Instant access to the deck can’t get any simpler and quicker. You just twist, align the small triangles that are located on the sides of the chimney and deck, and then pull in order to access your deck super quickly, any time, even with a full tank. Same with refilling, as a good old screw-on threaded cap is no longer here. Simply align the triangle on the side of the top cap with the dot on the rim right below and pull up to refill through the large liquid slots. Don’t need to worry if you find it hard to spot dots and triangles: If you twist and pull gently you will definitely get it when you reach the aligned – unlocking point of each mechanism.
– Airflow tuning via 4 pin options with air hole D=1.0mm/1.2mm/ 1.5mm/1.8mm pinned inside a D=4.0mm nest or via an AFC Ring adjusting from zero to D=4.0mm.
– M2.5mm pan head phillips post screws.
– Two parts screw-in custom Drip Tip / inner D=4.0mm, can also host any 510 drip tip.
– 10.0mm post-to-post space, ~6.6mm post-to-post net space , ~5.8mm coil space.
– Tank capacity 2ml.
– Max. net coiling height ~9.0mm (C & C Reducer out) / ~5.3mm (C & C Reducer in)
– Chimney top inner D ~5.2mm (C & C Reducer out) / ~3.0mm (C & C Reducer in)
– Height 510 excl., 39mm [Drip Tip off] / 47.0mm [Drip Tip on]
– Weight ~56g
– SS316 food-grade metal parts, PEEK Thermoplastic Insulators, POM (Acetal) Drip Tip, Steel nickel plated Post Screws, Borosilicate Glass Tank
Before using Tripod for the first time, it is strongly recommended that you take a good look at the manual to familiarize yourself with the detailed introduction, assembly/disassembly guides, useful tips.
– 1 x Tripod - DLC Carbon Black RTA
- 1 x Chamber & Chimney Reducer pre-installed)
– 1 x Set of spares (2 x Post Screws, 1 x O-ring Kit, 1 x Tank Body, 1 x AF Pins Kit)
– 1 x User Guide – 1 x Warranty Card